Installation – Aga Ranges 60RDA 115V User Manual

Page 4

Advertising
background image

Important Safety Issue

A cabinet “anti-tip” device is mounted to the back of your
drawer refrigerator. If your installation is a built-in
undercounter application, you do not need to apply this
feature. If your installation is a free-standing application
with no counter top directly above the top of the drawer
refrigerator, you must apply this feature to prevent the unit
from tipping forward when the drawers are pulled out. The
“anti-tip” device is attached at the back of each cabinet.
Please see installation instructions supplied with the “anti-
tip” device.

Electrical Connection

Use nominal 115 volt, 60 cycle AC only. DO NOT USE AN
EXTENSION CORD

Grounding Method

This product is factory equipped with a power supply cord
that has a three-pronged grounded plug. It must be
plugged into a mating grounding type receptacle in
accordance with the National Electrical Code and
applicable local codes and ordinances. If the circuit does
not have a grounding type receptacle, it is the
responsibility and obligation of the customer to exchange
the existing receptacle in accordance with the National
Electrical Code and applicable local codes and ordinances.
The third ground prong should not, under any
circumstances, be cut or removed. All U.L. listed
refrigerated products are equipped with this type of plug.

Installation

All specifications and product design subject to change without notice.

Such revisions do not entitle the buyer to corresponding changes, improvements,

additions, replacements or compensation for previously purchased products.

4

THIS UNIT SHOULD NOT, UNDER ANY

CIRCUMSTANCES, BE UNGROUNDED.

Advertising