Kenwood KRF-V6300D-S - Manual (Page 21)

English
21
Speaker setup (Easy Setup)
® Use [MULTI CONTROL ∞/5] to select your listening
position.
FRONT
CENTER
REAR
† Press [EASY SETUP].
The speakers are set up as shown below.
– Subwoofer :
ON
– Front speaker: Average size
– Center speaker: Average size
– Surround speaker: Average size
– Subwoofer re-mix* : ON
* The function for adding the bass of other channels to the
subwoofer channel according to the speaker setup.
• Easy setup with may not be appropriate with certain speaker
systems or listening environment. In this case, go through
<Speaker setup (Detailed Setup)>
™.
• Easy setup can set only the 5.1 channel system. If the setup for
the 6.1-channel or 7.1-channel system is required, go through
<Speaker setup (Detailed Setup)>
™.
The speaker setup can be completed by simply selecting the
room type and listening position. The audio will be corrected
automatically according to the characteristics of the speaker
system in use.
If more detailed speaker settings are required, use the procedure
in <Speaker setup flow>
™.
MULTI CONTROL EASY SETUP
MULTI CONTROL
O/
EASY SETUP
œ Press [EASY SETUP] to enter the easy setup mode.
∑ Use [MULTI CONTROL ∞/5] to select your room
type.
3m (9'10-3/8")
4m (13'1-7/8")
5m (16'5-3/8")
4m (13'1-7/8")
6m (19'8-7/8")
7m (23'3/8")
SMALL
12m 2 24m 2 35m 2
MEDIUM LARGE
é Press [EASY SETUP].
B60-5772-00_00_EN.indd 21 B60-5772-00_00_EN.indd 21 08.7.24 1:29:30 PM 08.7.24 1:29:30 PM