Select an additional rinse, Altering an option or a running programme, Interrupting a programme – AEG LAVAMAT 76650 User Manual
Page 18: Cancelling a programme
18
Use
Cancelling the delayed start
●
set the washing machine to PAUSE by pressing the button
8
;
●
press button
9
once until the symbol
0’
is displayed;
●
press the button
8
again to start the programme.
Important!
●
The selected delay can be changed only after selecting the washing programme
again.
●
The door will be locked throughout the delay time. If you need to open the
door, you must first set the washing machine to PAUSE by pressing the button
8
. After you have closed the door, press the button
8
again.
The button
9
can not be selected with DRAIN programme
.
Select an additional rinse
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press simultaneously the buttons
2
and
3
for some seconds: the pilot light
10.2
comes on.
This function stays permanently on. To disable it press the same buttons again
until the pilot light
10.2
goes off.
Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button
8
. Changing a running programme is possible only by resetting it. Turn
the programme selector dial to
O
and then to the new programme position.
Start the new programme by depressing the button
8
again. The washing water
in the tub will not be emptied out.
Interrupting a programme
Depress the button
8
to interrupt a programme which is running, the
corresponding light starts flashing. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a programme which is running. Now you
can select a new programme.
132963641.qxd 14/10/2008 9.00 Pagina 18