AB Soft Rotary Abdominal Back LS 526 - Manual (Page 9)

A
SSEMBLY STAGE
# 3
Attach Plate Holder & Press Arm to the Main Upright
Assembly Hardware Required:
(Some Hardware is Preinstalled in the Assembly Locations)
#17 Plate Spacer Qty. 1 #25 Button Head Allen Screw Qty. 1
#20 Spacer Qty. 1 #26 Curved Washer Qty. 2
#24 End Cap Qty. 1 #27 Nylon Nut Qty. 1
A SSEMBLY I NSTRUCTION
P AGE 8 A
SSEMBLY
I
NSTRUCTION
Assembly Description:
A) Assemble the Plate Holder (#7) and the Press Load Arm (#8) to the Main Upright (#6) by sliding
through the Round Selector Plate (#9) and Spacer / Bumper (#20). Secure in place using 1-Button
Head Allen Screw (#25), 2-Curved Washers (#26), and 1-Nylon Nut (#27) as shown.
B) Slide Plate Spacer (#17) onto the Plate Holder / Loading tube (#6).
C) Slide Roller Pad (#23) over the Press Load Arm (#8) and press Round End Cap (#24) into end of
the tube as shown.
♦ Assembly Stage #3 is complete
25
26
17
27
26
9
20
23
24
8
7