Tape playback, Activating the timer – Aiwa CT-X410 YU User Manual
Page 10
CTX410(YU)-total-En-10
9
ENGLISH
Activating the timer
1
With the unit on, press INFO.
The “MY INFO” indicator lights up and the
timer is activated.
The “MY INFO” indicator flashes between
turn-on time and turn-off time.
To cancel the timer
Press INFO again so that the “MY INFO” indicator
disappears.
To check the setting
With the unit off, press INFO.
The turn-on time, followed by the radio frequency
and the turn-off time, appears in the display
window, each for 1 second, then the unit turns off.
Notes
• Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and
tunes in the preset radio program at the preset
time automatically. When the program is over,
the unit returns to the former mode automatically.
• When this function is activated, TUNE
i
/
k
,
A.ME/PS, LO, and the preset number buttons
do not work for tuning in stations.
• Even if the unit is turned off and on, or the front
panel is detached and attached, this function is
active until turn-off time.
• Even if you are listening to a radio program with
this function, pressing FUNC switches the unit
to another mode. If you switch modes with
FUNC, the unit does not turn off at the turn-off
time of the timer.
TAPE PLAYBACK
1
Insert a cassette to start playback.
If a cassette is already inserted, press FUNC
repeatedly to select Tape Play mode to start
playback.
Playback starts in the direction that the unit
played back previously.
2
Adjust the volume with the Jog Dial.
Press the following buttons to operate tape
transport.
* When you eject the cassette, the unit switches to the
previous mode.
** Do not press
or
all the way. Doing so may
change the direction of tape transport.
MY INFORMATION SWITCH
To do this
Eject the cassette*
Change the playback
side
Fast-forward the upper
side (
l
) of the tape
Rewind the lower side
(
j
) of the tape
Rewind the upper side
(
l
) of the tape
Fast-forward the lower
side (
j
) of the tape
Stop fast transport and
resume playback
Press this button
and
simultaneously
or
lightly**