APC AP9924 - Manual (Page 13)

Wire Harness: Installation 11
Secure the Wire Harness
Secure the battery wires
After the battery wires are connected, secure the harness wires.
1. Using the 4-inch wire ties, attach the battery wires to the battery
straps.
2. Using the 8-inch wire ties, secure the harness to the enclosure to
prevent wire damage.
Warning
Secure the harness to the rack or cabinet to prevent damage
to the wires or personal injury by people tripping on them.
Caution
Attaching the wires too tightly could damage their
insulation.
m
p
h0
11
3a
m
ph 01
14
a