Texsport 02906 Wayford Screen Arbor - Manual

INSTRUCTIONS
Item 02906
Wayford Screen Arbor
Thank you for purchasing this Texsport screen arbor. Please read and understand each step of the set-up instructions. We encourage you to set-up
this screen arbor at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you
enjoy your new screen arbor and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A ......1 screen arbor skin
B ......2 Long shock-corded
roof poles
C ......4 Chain-corded legs
D ......1 Short shock-corded,
rubber end roof pole
E ......Guy ropes, clews and
stakes
NOTE:
Prepare your camp site by
removing all sharp stones, twigs,
etc. The site should be flat and
have no depressions that could
collect rain water.
A
B
C
D
E
STEP 1 - Spread out screen
arbor skin. STEP 2 - Assemble the 2 long
roof poles (B), and insert into
the roof sleeves. STEP 3 - Insert the roof poles
into the molded corner joints.
STEP 5 - Insert rubber end of
pole into the web pocket to
secure. STEP 4 - Assemble the short
rubber end, roof poles (D), and
insert into the roof sleeves. STEP 6 - Tie all poles together to
secure poles to arbor skin.
STEP 7 - This is what your
arbor roof should look like. STEP 8 - Assemble the leg poles
(C) and insert into the molded
corner joint. STEP 9 - Snap on speed clips
onto the leg poles.