Phottix Odin for Sony - Manual (Page 4)

After turning on the Phottix Odin TCU and
receivers, slave mode does not need to be set
on flashes on Phottix Odin receivers, but
flashes need to be set in TTL mode, Flash Zoom
needs to be set to Auto, LEVEL needs to be set
to Auto (or the maximum value 1/1) and AF to
ON (see your camera/flash manual for details).
Ensure there is a good hot shoe connection
between the TCU and camera, and flashes and
receivers for best performance.
Many TTL flashes have been tested but the
manufacturer cannot guarantee that all third
party TTL flashes will function properly with
the Phottix Odin. It has been designed and
optimized for original Sony flashes using the
ADI TTL system. Issues with third party flashes
will not be supported.
Tips:
Turn off all devices – flashes/strobes,
cameras, and the Phottix Odin TCU and
receivers – when connecting and disconnect-
ing devices.
4
Please Note
The firmware of the TCU and receivers can be
upgraded using the included USB cable. Any
upgrades and full instructions will be
a n n o u n c e d o n t h e P h o t t i x B l o g
(journal.phottix.com).
Upgrading firmware by USB
The Phottix Odin TCU offers compatibility with
Phottix Strato and Phottix Strato II Multi receiv-
ers. The Odin TCU will trigger Strato receivers
but will not transmit TTL or power control data.
Compatibility with Phottix Strato
Series Flash Triggers