Phottix Trafo Junior - Manual (Page 4)

4. Insert Crossbar into Crossbar Rods Attachment, slide onto
rails and tighten screws.
5. Place handles onto the end of the crossbar and tighten
screws.
Trafo Assembly Instructions
4
5
EN
Follow Focus Instructions:
1. Attached the metal adapter to the flexible lens ring -
change the size as needed to the lens.
2. Tighten the screw, joining the two halves of the metal
adapter.
3. Mount the camera on the rig.
4. Adjust the Follow Focus unit on the rods so it aligns with
the lens ring. Tighten in place.
5. Adjust the Follow Focus horizontally, moving it until it fits
with the lens ring. Tighten the adjustment screw.
6. Set the lens on manual focus and rotate the Follow Focus
knob to achieve focus.
3