Teledex Y Series - Manual (Page 2)

Preface
This manual provides information related to the
installation and operation of this device. The
individual reading this manual is presumed to have
a basic understanding of telecommunications
terminology and concepts.
Important Safety Instructions
With reference to unpacking, installation, use,
and maintenance of your electronic device, the
following basic guidelines are recommended:
• Do not use or install this product near water,
to avoid fire or shock hazard. For example,
near a bathtub, kitchen sink or laundry tub,
or near a swimming pool. Also, do not expose
the equipment to rain or damp areas (e.g., a
wet basement).
• Do not connect the power supply cord on
elevated surfaces. Allow it to lie freely. There
should be no obstructions in its path and no
heavy items should be placed on the cord. In
addition, do not walk on, step on, or mistreat
the cord.
• Use only the power cord and adapter that are
shipped with this device.
• This product is intended to be supplied by a
UL Listed Power Supply with marked with
“L.P.S.”, or “Limited Power Source”, and
output rated 12 Vdc, minimum 1.0A.
• To safeguard the equipment against
overheating, make sure that all openings
in the unit that offer exposure to air are not
blocked.
• Avoid using a telephone (other than a cordless
type) during an electrical storm. There may
be a remote risk of electric shock from
lightening. Also, do not use the telephone to
report a gas leak in the vicinity of the leak.
• Never install telephone wiring during stormy
weather conditions.
• Follow the manual’s instruction for wiring
which should comply article 725 and article
300 in national electrical code for class 2
circuit and wiring in duct.
• All the installation should performed by
qualified personnel.
CAUTION
• To reduce the risk of fire, use only No. 26 AWG
or larger telecommunication line cord.
• Always disconnect all telephone lines from the
wall outlet before servicing or disassembling
this equipment.

WARNING
• Disconnect the power line from the device
before servicing.
• Power supply specifications are clearly stated
in Appendix B—Specifications.
Copyright
Copyright© 2013 Cetis, Inc. All rights reserved.
The information contained herein is proprietary
to Cetis, Inc. No part of this document may be
translated, transcribed, reproduced, in any form,
or by any means without the prior written consent
of Cetis, Inc.
This program is free software: you can redistribute
it and/or modify it under the terms of the GNU
General Public License as published by the Free
Software Foundation, either version 3 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU General Public License for more details.
2 www.teledex.com Y SERIES EXP100 USER GUIDE