Holtkoetter 2508 User Manual

Halogen pharmacy lamp no. 2508, Assembly instructions for, Caution, important safety instructions

Advertising
background image

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: (800) 899-5444 • Fax: (888) 552-8661

e-mail: [email protected]

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

®

and Holtkötter Leuchten

®

are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter

Halogen Pharmacy Lamp

No. 2508

CAUTION, IMPORTANT SAFETY INSTRUCTIONS

This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electrical shock. This plug will fit a polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC
SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR
INJURY TO PERSONS

WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO
PERSONS:

1. Turn off power/unplug and allow to cool before replacing bulb.
2. Bulb gets HOT quickly. Contact only switch/plug when turning on.
3. Do not touch hot lens, guard or enclosure.
4. Do not remain in light if skin feels warm.
5. Do not look directly at lighted lamp.
6. Keep lamp away from materials that burn.
7. Use only with a 100 Watt, bayonet base halogen bulb or smaller bulb.
8. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
9. Do not operate the portable luminaire with a missing or damaged guard, lamp containment

barrier or UV filter.

SAVE THESE INSTRUCTIONS

Please make sure that the following parts for your lamp are enclosed:

1. Reflector
2. Aluminum Ring (attached to lamp)
3. Glass Shield
4. Allen Wrench (packed inside bulb box)
5. Large Washer (2 each, already installed)
6. Handle with plastic protector
7. Small Plastic Washer (attached to reflector)
8. Small Plastic Nut (attached to reflector)
9. Bayonet Base Halogen Bulb
10. Floor Lamp
11. Foot Dimmer

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth may be used
to spot clean. Do not use common household cleaners or brass cleaners on lamps
or fixtures, as the lacquer on the outside of the brass may be damaged as a result.

Enjoy your new Holtkötter lamp.

Advertising