Holtkoetter 9680LEDP1 - Manual

205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: [email protected]
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Final assembly by Holtkötter in South Saint Paul, MN. Holtkötter ® and Holtkötter Leuchten ® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
LED Chairside Reading Lamp
No. 9680*LED P1
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.
Congratulations, you have just purchased the leading-
edge dimming technology from Holtkötter International,
Inc. Our “Dimm-System Punkt 1” (Dimming System Point
1 (*P1)) is specifically designed to provide specialized
features for ease and convenience of use.
Features of “Dimm System Punkt 1” include:
Point Dimming - turn the lamp on
with a single click of the P1 dimmer.
Soft On - the lamp comes on low
and continues to brighten to full brightness.
This allows the eye to adjust to a gradual
increase in light.
Soft / Delayed Off - turn the lamp off with
a single click of the P1 dimmer. The lamp
dims to 60% brightness of the original
setting, remaining briefly at that level
to allow you to exit the room; then the
lamp gradually turns itself off. This “soft”
off provides a few moments of light after
turning the lamp off, rather than immediate
darkness as is the case with other switches.
Dimming Cycle - to adjust the lamp to the
perfect light level for any situation, press
and hold the P1 dimmer. The dimmer will
cycle through all dimming levels. When
the lamp achieves the light level of your
choice, release the P1 dimmer.
No assembly is required.
Detail of LED Reflector
Detail of P1 Dimmer