Burr King Model 1000 - Manual (Page 10)

See our catalog at www.burrking.com contact us @ [email protected]
DOC 1000OP-99 06/07
4
-----------------------------------------------------------------------------------------------------------
-
Remember for operator safety and the continued effectiveness of your Model 1000:
Do not defeat the safety guards and other safety provisions of the Model 1000.
Do not reach inside the safety guards while the machine is running. To do so is
hazardous.
Do not use fluids in your buffing process unless your Model 1000 is designed for
liquid operation (NEMA 4, 4X). To do so may create an electrical safety hazard.
Do not use your Model 1000 to polish explosive materials unless it is equipped with
explosion proof electrical devices and motor.
Do not mix alloys in your buffing. To do so may create an explosion hazard.
Do not use stone or vitreous wheels on the Model 1000. To do so will create an
operator safety hazard.
Do use eye, hand, face, arm, leg, feet and body protection that is adequate to protect
against flying debris, forcibly ejected work pieces, etc.
Do not wear loose fitting, of hanging clothing that might become entangled in the
rotating wheels, or shafts.
Do train operators and others in safe operating practices.
Post these or equivalent instructions such they are available for ready operator
reference.
For spare parts, or other assistance contact your Burr King distributor; or, contact Burr
King Manufacturing at 1-800-621-2748.