Burr King Model 200s - Manual (Page 7)

BURR KING MFG. CO., INC.
1220 TAMARA LANE
WARSAW MO 65355
WWW.BURRKING.COM
(660) 438-8998 (800) 621-2748
FAX (660) 438-8991
October 2007
Operating instructions for Models 150 and 200 VibraKING
®
enhanced
performance vibratory bowls
The VibraKING 150 and 200 enhanced performance vibratory bowls are bench top, or stand mounted
vibratory processing machines. The bowls are compatible with ceramic, plastic, shell, cob, and most other
media types. The bowls include a port for fluid induction, and a port for fluid draining. The bowls are
excellent for de-burring, de-scaling, cleaning, surface moderating, and polishing of metals, plastics, and other
materials.
Improved performance features of the 150 and 200 bowls
• The bowls may be used with 50 or 60 hertz, 110/115/120 VAC, single-phase electrical power.
• Vibratory amplitude is easily, and continuously adjustable from zero to full amplitude.
• The bowls may be operated with media/ part loads from light to full capacity without damage provided
the counterweights are adjusted for the load (see next page).
• A one fifth horsepower AC motor rotating within a rotation range of 1500 to 1700 RPM (dependant on
the bowl load instilled) provides vibratory energy to the bowl.
At receipt and prior to using you VibraKING
®
bowl
Before leaving the Burr King factory your VibraKING
®
bowl was completely tested and inspected to assure
that is was complete, functional, damage free, and properly packaged for shipment. You should:
• inspect the equipment for completeness and shipping damage. If anything is missing contact you’re
equipment supplier, or Burr King Manufacturing. If there is shipping damage file a claim with the freight
carrier that delivered the bowl,
• read all instructions completely. If you have questions please contact your equipment supplier or Burr
King Manufacturing for assistance,
• verify that you have your media and compound of choice,
• locate the warranty card, complete it, and return it to Burr King Manufacturing. This will insure that we
can better assist you in the unlikely event you require warranty service.
Equipment start-up
• Place the bowl on a stable, working surface such as a solid workbench, metal pedestal, or the Burr King
StandPAK
®
5000 process stand. Avoid surfaces that are slick or any other work surface that could place
a person (or property) in danger should the bowl fall from, or otherwise be dislodged from the work
surface. Burr King’s StandPAK
®
5000 is an excellent work station on which to mount your VibraKING
®
bowl. The StandPAK
®
5000 incorporates a process timer, power distribution panel, and receiver for the
FilterPAK
®
4000 all in stable, rugged steel base that is professionally finished.
• Select a work location near an AC power output plug that provides 110/115/120 VAC, single phase, 50-
60 hertz electrical power of at least 2 amperes current capability.
Avoid electrocution hazards
. The 150 and 200 bowls are not NEMA 4 or NEMA 4X rated. They
must not be used in a manner that allows fluids to enter the unit base, power cord, on/off switch, or
electrical plug.
Avoid fire and explosion hazards . The use of fluids other than water and Burr King specified
soaps in the bowl (or any associated fluid re-circulating system) may create a fire/explosion hazard
See our catalog at www.burrking.com Contact us at [email protected]
DOC 200-100 REV 10/07
1