Burr King M40 CombiPak - Manual (Page 24)

Preformed Tumbling &
Vibratory Ceramic Abrasives
Compositions
P-60
= Light cut, superior finish, leaves clean surface, good for aluminum parts. (78-80lbs.)
P-40
= Good cut and wear life, excellent finish, ideal for general purpose use, economical
(89 to 90 lbs. per cubic foot)
P-20
= Fastest cut, for heavy deburring, matte finish. (85 to 90 lbs. per cubic foot)
General Information
Successful parts processing depends not only on the capability of equipment used, but also on
the type, shape and size of the media used.
Users whose work requires preforms will find that an understanding of the types available will
influence the quality of their work as well as time cycles and operating procedure.
We are totally capable of rendering assistance in your selection of specific media and equipment
for your particular problem in deburring and finishing.
We base our recommendations and technical information on testing we consider reliable, but
they are based on information we assume is correct from our dealers, agents and customers.
Soap Solutions
AR-60 -
Anti Rust solution is the neutral liquid used for prevention of oxidation and rust
formation. Excellent for rinse after tumbling to prevent spotting and streaking of aluminum
and magnesium. Can be mixed hot or cold. When used as a dip will impart a dry, on oily
microscopic film which does not require removal for subsequent operations. Anti rust is
mildly sudsy.
BKS-60
soap solution has a slightly alkaline liquid that is especially designed for vibratory
equipment as it is a low sudser. Contains some petroleum additives.