U.S. Products DRIMASTER 3 UPHOLSTERY TOOL - Manual (Page 21)

4-1: Assemblies and Parts Lists
4 - Assemblies and
Parts Lists
This section of the manual shows the DM III assembly illustrations.
Some of the illustrations in this section reference sealants, thread lockers, adhesive,
primer, anti-seize and lubricant specifications that are used in the construction of
HydraMaster equipment.
Refer to Figure 4-1 to identify those substances such as A1, A2 and so forth. Equivalent
products are acceptable if they meet or exceed current specifications and are approved
by HydraMaster.