Microlab B 77 - Manual (Page 3)

Back view
1. Bass Reflex tunnel
2. Cooling fins
3. Audio inputs RCAs
4. Audio output Terminal
5. Bass volume
6. Treble volume
7. Power LED
8. Power cord
9. Power switch
15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
Clear and powerful stereo bookshelf speaker system with excellent speaker drivers. Ideal for music /
movie entertainment and multimedia applications. Great sound from specially design wooden cabinets
that entertains you in most occasions.
Features bass and treble controls for your preferred sound effects.
Perfect sound every time from your music playbacks and for your perfect entertainment. Uncolored
audio, precise position, high resolution and depth with Microlab own audio technology and design.
Features
• Classic bookshelf design for that warm and clear sound
• Stereo speaker system with bass reflex tunnel for deeper resolution
• 4" bass and 0.75" treble drivers for excellent range
• Ideal for all digital and analog sounds
• Wooden cabinet design with good resonance characters
• Built-in amplifier ideal for Mp3, Mp4, and media players, etc.
• Features 2 sets of RCA inputs connection for added convenience.
Packing list
You should find following items while unpacking:
Illustrations
Product connection and operation
Connections
1. Connect the left speaker to the main / right speaker terminal clamp interfaces. Use the provided
interconnect speaker cable and clamp the terminals with the bare copper wires.
2. Place both bookshelf speakers on extreme sides of the listening position.
3. Connect the playback device to the rear PC or AUX input interfaces of the right speaker. Use the
included 2RCA to 3.5mm stereo cable. Please use only a single set of RCA connectors to avoid
interferences.
4. The main / right speaker should be placed near a power source and near the playback device such as
CD/DVD, Mp3/Mp4 player or TV.
5. Last, connect the AC power cable at the rear of the main / right speaker to the AC power supply source.
Please ensure the AC power supply match the power requirement printed at the rear panel.
Operation
1. Ensure the master volume is at the lowest setting.
2. Turn on the main AC power and switch at the rear of the main speaker. The green power LED will be
illuminated.
3. Start the playback device and song.
4. Slowly adjust the front volume to your preferred volume level and enjoy.
5. Next, adjust the bass and treble levels at the back panel to your preferred sound effects.
EN
4
Satellites B-77 2 pcs
3.5mm stereo - 2RCA cable
1 pc
Interconnect speaker cable, 1.8 m 1 pc
User manual 1 pc
Connections
PC or Notebook
Mp3 / Mp4
Media player
CD / VCD / DVD
player
AC power supply
AC 100V - 240V ~
50/60 Hz, 1 A
Main/Right speaker Left speaker
3.5mm stereo
Interconnect
speaker
cable
AUX P C
7
AUX P C
7
microlab
Front view Back view
1
2
3
4
5
6
7
8
9
1
Front view
1. Master volume
Terminal interface
80-B77-97-3164-01 2011-05-09