Microlab Solo 6С - Manual (Page 3)

Remote control
Right speaker Left speaker
AC power supply
CD / VCD / DVD
player
Mp3 / Mp4
Media player
PC or Notebook
Illustrations
Main speaker
15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
Listen to high quality sound from Microlab SOLO series. This series employ high quality design
techniques and speaker technology - perfect sound quality and near linear response for uncoloured
tones. Built using sound optimized wood material in bookshelf size cabinets.
Ideal for most type of room sizes and shapes. The traditional bookshelf size allows for convenient
placement in most environment and space. Perfect for all music lovers and audiophiles.
Includes an infrared remote control for convenience.
Features
џ
џ
џ
џ
џ
џ
Beautiful wooden cabinets with excellence sound quality
Powerful 2-way speaker system
Crystal clear dynamic highs, balanced mid range and deep bass
Reference monitor quality, driven by high quality drivers
Each cabinet with 1" tweeter for high notes and woofer for mid to low depths and bass. Includes
wireless remote control
Ideal for high fidelity music, movies and digital media playbacks
Packing list
You should find following items while unpacking:
SOLO 6C
3.5mm stereo - 2RCA cable 1pc
Interconnect speaker cable 1pc
Remote control
1 pc
User manual 1pc
speakers 2pcs
Product connection and operation
Connections
1. Connect one end of the interconnect speaker cable to the audio input terminal post at the back of the
left speaker. The golden wire connect to red terminal, and the silver wire connect to black terminal. The
other end to the right speaker audio output terminal post at the back.
2. Connect the RCA plug of the audio cable to the audio input jacks of the right speaker, and the 3.5mm
stereo plug to the audio output jack of the media playback device.
3. The system comes with dual 2RCA input jacks for dual source connections. For optimized
performance, it is advisable to have only one source connected.
4. Make sure all the cable are connected correctly, then connect the power cord to AC outlet.
Operation
1. Turn on the AC mains and switch the speaker power on at the rear power switch.
2. Turn on the media player and begin the audio playback.
3. Adjust the volume to your preferred listening level on both player and speaker system.
4. Alternatively, you can use the remote control to adjust the volume levels and sound effects.
EN
4
HDD AV
HDD media player
TV
7
ON
OFF
AC IN
L - L+
L
R
TO L SPEAKER
+ —
AUDIO
INPUT
AUX PC VOLUME
1
3
4
2
5 6
ON
OFF
AC IN
L - L+
L
R
TO L SPEAKER + —
AUDIO
INPUT
AUX PC VOLUME
Main speaker
1. Cooling fins
2. Volume control
3. Audio input
4. Output
5. Power
6. Power cord
7. Remote control - infrared
signal port and digital display
Remote control
1. Mute
2. Input select
3. Volume +/-
4. Bass +/-
5. Treble +/-