Microlab M 500U User Manual
Page 3
15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
Pure definition and higher resolution 2.1 subwoofer speakers designed for multimedia and computer
applications. Ideal for your favourite music and movies. Multiple playback platforms with various inputs
from USB to SD card slot.
2.1 subwoofer system that fills your room with clear and perfect acoustic
Features
1. Quality 2.1 subwoofer system with powerful bass effect
2. Ideal for digital multimedia movies, TV, CD/DVD and Mp3/Mp4 playbacks
3. Microlab M series, your ultimate introduction to serious music entertainment
4. Crystal clear satellites for dynamic audio movements with reflex function for efficient speaker
design
5. Comes with multi-input interfaces for various playback modes such as USB dongle and SD card,
3.5mm and 2RCA jacks
Packing list
You should find following items while unpacking:
Illustrations
Front View
Product connection and operation
Connections
1. Connect the satellites to the left and right RCA interfaces.
2. Place both satellites on extreme sides of the listening position.
3. Connect the playback device to the rear input interfaces of the subwoofer with the included cable.
4. A choice of 3.5mm stereo or 2RCA jacks are available at the rear panel of the subwoofer.
5. Last, connect the power cable at the rear of the subwoofer to the AC power supply source. Please
ensure the AC power supply match the power requirement printed at the rear panel.
Operation
1. Master volume: main volume knob for direct audio level adjustment.
2. USB type A slot: Insert USB dongle with digital music fi les for instant playback.
3. SD card slot: Insert SD memory card up to 16GB capacity of digital music fi les for instant
playback
4. AUX LED: LED indicator l ights up when media player source from RCA connection is
selected.
5. USB/SD LED: LED indicator l ights up when media player source from USB or SD card slot is
selected.
6. MUTE button: Depress this button to turn off volume level during playback.
7. Previous: Depress this button to move one track back.
8. Play / Pause: Depress this button to start play or pause the music track.
9. Next: Depress this button to skip to next track.
10. Input selector: Depress to change the input source between RCA, USB type A and SD card
slots.
EN
4
Front view
1. SD card slot
2. USB type A slot
3. USB / SD LED
4. AUX LED
5. Master volume
M-500U subwoofer 1pc
M-500U satellites 2pcs
3.5mm stereo - 2RCA cable 1pc
User manual 1pc
Back view
1.
operation - high temperature
2. Power On/Off
3. AC power supply: 220V-240V~ 50Hz
4. Audio input: Source input from e.g., CD/DVD,
Mp3/Mp4 players, TV, or game console, etc.
5. Audio output: to right and left satellites
Avoid touching the back panel during
Subwoofer
Right satellite
Left satellite
To AC power supply: 220 V - 240 V 50 Hz 140 mA, or 100 V - 120 V 60 Hz 280 mA
depending on country type and version purchased
PC or Notebook
Mp3 / Mp4 Media player
CD / VCD / DVD
player
R
L
AUDIO OUTPUT
MODEL: M-500U
AC IN: 220V-240V~ 50Hz 140mA
MADE IN CHINA
ON
OFF
AC IN
High temperature during operation
Avoid touching back panel
MULTIMEDIA SPEAKER
R
L
AUDIO INPUT
+
—
BASS
VOLUME
AUX
USB/SD
1
2
3
4
5
6
7
8
9
10
6. Mute
7. Previous
8. Play / Pause
9. Next
10. Input selector
1
2
3
4
5
R
L
AUDIO OUTPUT
MODEL: M-500U
AC IN: 220V-240V~ 50Hz 140mA
MADE IN CHINA
ON
OFF
AC IN
High temperature during
operation
Avoid touching back panel
MULTIMEDIA SPEAKER
R
L
AUDIO INPUT
+
—
BASS
Back view