Microlab X 13 - Manual (Page 3)

1
Front View Back view Remote Control
Subwoofer
To AC power supply: 220 V - 240 V 50 Hz 140 mA, or 100 V - 120 V 60 Hz 280 mA
depending on country type and version purchased
PC or Notebook Mp3 / Mp4 Media player
CD / VCD / DVD
player
Right satellite Left satellite
2 3 4 5
15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
Designed for small home system series, the X series consist of a powerful subwoofer
and small satellites. This powerful high fidelity system consist of a 2.1 subwoofer setup,
ideal for movie and music entertainment.
Built with several proven technologies such as FineCone, Fine Moto, Fine Box, and
eAirbass for perfect sound production.
Perfect for Home theater layout and watching movies, or enjoying your favourite music,
with full cinema acoustics
Features
1. Powerful 2.1 subwoofer speaker system for surround effects and acoustics
2. Satellites can be floor standing (detachable), or on the desk, or mounted on the wall
3. Full range clear acoustic with deep powerful bass
4. Designed using many proven technologies such as Finecone V12, FINE BOX, FINE
CONE, and FINE MOTO
5. Comes with wireless infrared remote control
Packing list
You should find following items while unpacking:
Illustrations
Product connection and operation
Connections
1. Connect the satellite speaker cables into the corresponding L & R audio output jacks on the back of the
subwoofer, then put the left channel satellite speaker on the left and the right satellite on the right.
2. Connecting the speakers to the audio source.
1) please use the audio cable(3.5mm-2RCA). Connect RCA plugs of the audio cable into the L&R AUX
input jacks on the back of the subwoofer, the other end into the output jack on the stereo audio source.
2) please use the audio cable(3.5mm-2RCA). Connect 3.5mm stereo plug of the audio cable into the PC
input jack on the back of the subwoofer, the other end into the L&R output jacks on the audio source.
3) Please use the audio cable(3.5mm-3.5mm). Connect one end of the audio cable to the PC input jack on
the back of the subwoofer, then the other end to the output jack on the stereo audio source, remarks: the
audio cable(3.5mm-3.5mm) set is only for demonstration
3. Check the connection and make sure every cable is correctly connected, then connect power plug to
the right AC outlet. The shape of the plug and power outlet depends on the country of use.
* Statement indicating that the socket-outlet shall be installed near the equipment and shall be easily
accessible.
* The highest environmental temperature suitable for this product is 40°C.
EN
4
Front view
1. Standby
2. Input select
3. Treble/Bass
4. Volume-
5. Volume+
Subwoofer 1pc
Satellite speakers 2pcs
Satellite stands(plastic) 2pcs
Remote control 1pc
Back view
1. Heat sink
2. PC INPUT
3. AUX INPUT
4. AUDIO OUTPUT
5. POWER CORD
6. FUSE
7. POWER
1
2
3
4
5 6 7
Batteries 2pcs
Audio cable(3.5mm-2RCA) 1pc
User manual 1pc
Remote Control
1.ST-BY
2.AUX
3.SLEEP
4.Reset
5.BASS
6.Mute
7.BAL R/L
8.MASTER VOL +/ -
9.TREBLE+/-
10.PC
1 2 3
4
5
6
7
8
9
10