Microlab M 860 - Manual (Page 3)

15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
High fidelity 5.1 surround speakers designed for digital home theater multimedia and computer
applications. Separate subwoofer cabinet and 5 extreme versatile satellites that enhances the sound
effects movement within the room.
With bass reflex tunnel technology.
Surround 5.1 system that fills your room with clear and perfect acoustic and action pack realism.
Features
1. Powerful 5.1 surround system for Home theater entertainment
2. High fidelity and full range acoustic performances
3. Deep bass and dynamic full range production for a full movie effects
4. Front master volume for easy access and wireless remote control
5. Magnetically shielded for interference free positioning
Packing list
You should find following items while unpacking:
Illustrations
Front View
Product connection and operation
Connections
1. Connect all satellites speakers RCA plugs into the subwoofer ’s audio output jacks at the back
panel. Carefully match each corresponding satellite type with each output type.
2. For Stereo: connect the source cable’s 3.5mm stereo plug to the media player or TV. Insert the
2RCA plugs to the audio input sockets at the back of the subwoofer.
3. For 5.1 Channel: connect each corresponding RCA output type from the media player or AC3
decoder, to the subwoofer 5.1 channel RCA input jacks.
4. Locate the power source and connect the AC cable to it.
5. Turn on the AC power supply
Operation
1. Turn on the system by depressing the power switch at the back of the subwoofer. The power LED
in front will illuminate.
2. Ensure the volume level is set to lowest.
Front panel operations
1. The ST-BY/MUTE LED is illuminated, turn the Volume knob to activate the system.
2. Depress the INPUT SEL button to select the audio input mode between 5.1CH/CD and AUX. The
front panel LED will illuminate the respective input mode.
3. Start the playback device and song.
4. Turn the Volume knob slowly to your preferred listening volume level.
EN
4
Front view
1. Standby / Mute LED
2. Volume LED
3. Input selector
4. Input LED
5. Output LED
M-860 subwoofer 1 pc.
M-860 satellites 5 pcs.
3.5 mm stereo - 2RCA audio cable
1 pc.
2RCA - 2RCA audio cable 3 pcs.
Remote control 1 pc.
User manual 1 pc.
Remote control
1.
2. Input selector
3.
4. Center + / -
5. Mute
6. Reset
7. Mode
8. Subwoofer + / -
9. Volume + / -
Standby
Surround + / -
Back view
1. AUX input stereo
2. 5.1 CH / CD input
3. Audio output 5.1 CH
4. Fuse holder
5. AC power supply
6. Power switch
Back view Remote control
1 2 3 4 5
1
2
3
4
5 6
1
2
3
4
5
6
7
8
9
PC or Notebook Mp3 / Mp4 Media player
CD / VCD / DVD
player