AMICA ZIA 648 - Manual (Page 2)

QUICK REFERENCE GUIDE GB
On/off button
You turn your dishwasher on / off with this button. When turning on,
the indicator light for the last used programme will light up.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection buttons
Use the program selection button to select the desired program.
The corresponding program light lights up.
���� ��
�
�� ��
� � �
Visual Indicator
Visual Indicator
17 9260 01 00-AA
Half Load / Tablet Detergent Button
Half Load/Tablet Detergent Button allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
Half Load Function
If you want to run your machine without loading it completely, place
your dishes into the machine as you desire. Press the On/Off button
to turn on your machine. Press the Half Load/Tablet Detergent
button after selecting the desired program until Half Load Indicator
lights up, then press Start/Cancel button and close the door of your
machine. With the Half Load option you can use every part of your
lower and upper baskets and you can save from both water and
power.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet
Detergent function allows obtaining a better drying performance
from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1,
etc., called as all-in-one detergents. The programs in which the
tablet detergent function can be enabled is indicated in the Program
Data and Table of Average Consumption Values. Tablet Detergent
Indicator lights when the Tablet Detergent function is selected.
Salt and Rinse Agent indicators turn off when this function is
activated.
Turn on your machine by pressing the On/Off button to use the
Tablet Detergent function. Press the Half Load/Tablet Detergent
button after selecting the desired program until Tablet Detergent
Indicator lights up, then press Start/Cancel button and close the
door of your machine.
To use the Half Load and Tablet Detergent functions concurrently,
turn on your machine by pressing the On/Off button and then press
the Half Load/Tablet Detergent button until Half Load and Tablet
Detergent Indicators illuminate together.
Important: !
If you have used the Half Load or Tablet Detergent features during
the last program you used, Half Load or the Tablet Detergent
function will remain active in the next washing program you will
select. If you do not want to use these functions in the new program
you have selected, press the Half Load/Tablet Detergent button until
the indicator of the relevant function turns off.
Changing Warning Sound Volume
To change the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Every time you press the Half Load/Tablet Detergent button, the
warning sound level will change as - - Off, S:01 Low, S:02 Medium,
and S:03 High. Turn off your machine using the On/Off button to
save it. Factory setting of your machine is S:03.
Display
Water hardness level, Time Delay for the selected programme and
warning message are displayed.
Time Delay
Using the Delayed Start button, you may delay the starting time of
your program up to 9.5 hours with increments of 30 minutes. After
delaying the start, press Start/Cancel button and close the door of
your machine. Once the delay time is over, the selected program
will start automatically.
Canceling the delay function
Keep the Start/Cancel button pressed for 3 seconds. The selected
delay period will be cancelled.
As soon as the canceling starts, the water that may be remained in
your machine will be drained for 30 seconds due to safety reasons.
Start/cancel button
When you press the Start/Cancel button, the washing program you
have selected will start.
(Start/Cancel indicator lights in Start mode, and turns off in Pause
mode)
How to cancel the washing program
To cancel the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Press and hold the Start/Cancel button for 3 seconds. Release
the button when the Start/Cancel indicator starts flashing. Once
you close the door of your machine, draining is completed in 45
seconds - 2 minutes and the machine gives an audible warning
when it is completed.
Important: !
Depending on the stage of the programme you have cancelled,
there may be detergent residue or rinse aid inside the machine and
on the load. Make sure the items in the dishwasher are not used
before washing properly.
How to change the washing program
To change the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Press Start/Pause/Cancel button first to switch your machine
into pause mode if you want to change your selection after you
have started the program. Then, switch to the desired program
by pressing Program Selection button. Start the new program by
pressing Start/Cancel button again.
Important: !
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
Warning !
Depending on the length of the terminated program detergent and
rinse aid may still be in the dispensers.
Improper Loading Of Dishware
Note for Testing Institutes
The necessary information for performance testing will be provided
upon request. The request can be done by e-mail through:
[email protected]
Please do not forget to write the model code and stock code
information of the
appliance besides your contact information in the e-mail. The model
code and stock code information can be found on the rating label,
which is placed on the side of the door.