ConnectPRO HDMI-EDID - Manual (Page 2)

Application Connection Diagram
To clone EDID information first. Connect emulator to the monitor.
TM
DDC Emulator
Monitor
DDC In
Special note:
Emulator’s power supply has to be connected via DC jack or USB-A/B first.
Which provide two-way DDC communication
will need DDC Emulator placed between extender unit and PC.
DOES NOT
Old Video or KVM extender
PC
TM
DDC Emulator
Video / KVM
Extender
Video Out Video In
Display
Video / KVM
Extender
Legend
CATx Cable
Step 1
Step 2 for KVM
Which provide two-way DDC communication
will need DDC Emulator(s) placed between KVM switch
and each connected PC.
DOES NOT
Traditional KVM Switches
TM
DDC Emulator
PC
KVM Switch
Video Out Video In
Display
TM
TM
TM
Step 2 for Video / KVM extender
TMDS-EDID
Power Adaptor
Digital Video EDID Emulator / HDMI Compliant 3D with HDCP
Model Description
* Any other interface is available upon request
Cables
1-ft Male-to-Male HDMI cable HDMI-202-1
Power supply DC 5V ( 2000 mA ) - AC 110/220V for USA PAUS-DC5V2A
4-ft USB A-to-B cable UC-AB-04
Optional part / accessory
Ordering Information
ConnectPRO - USA, Taiwan
www.connectpro.com
13F., No.120, Sec. 1, Sanmin Rd., Banciao Dist.,
New Taipei City 220, Taiwan, R.O.C..
Tel +886-2-8964-2700
Fax +886-2-8964-2977
20525 Paseo Del Prado Walnut, CA 91789, USA
Tel +1-909-444-9288
Fax +1-909-444-9289
Corporate Office
Design Center and Operational Hubs
TM
Doc:IG-TMDSEDID_V2-1
Specification
Mechanical
Weight
Certification
Functional
FCC, CE
Dimensions H x W x D
113 g ( 0.25 lb )
27 x 70 x 103 mm ( 1.06 x 2.76 x 4.06 inch )
TMDS-EDID
Max. 1920 x 1200 @ 60Hz
Green – power on, Orange – clone indication
USB or 5V / 2A DC adaptor
HDMI x 2
Push button switch
1ft HDMI cable
2.25 Gbps
Power supply
Clone EDID
Resolution
LED indication
Connectors
Cable
Bandwidth
1 W Power consumption
LPCM 7.1, 5.1 or 2 channel / compressed digital bit-stream Audio
Hardware HDCP engine ( pre-programmed ) HDCP