MagTek EXCELLA STX - Manual (Page 2)

Figure 2. Rear Print Cartridge Installation/Removal
4. RUN EXCELLA STX DEMO
• Click on the Excella STX Demo icon to run the demo.
• The Demo’s main screen will be displayed (see Figure 3 below).
• In the Select Device window, choose the device you want to connect to; when using the MagTek USB
Drivers choose STX.STX001.
• Click on the Connect button.
• Based on the document you want to read, click on one of these buttons:
o Check, to read and scan checks (the left LED is blinking)
o Card, to read and scan ID cards (the right LED is blinking)
o MSR, to read and scan Magnetic Stripe Card (the central LED is blinking)
• Feed the appropriate document.
Figure 3. Excella STX Demo’s main screen
2
P/N 99800066 Rev. 1.02 08/06