MagTek MICRImage User Manual
Micrimage, Check reader
Advertising
Table of contents
Document Outline
- MICRImage
- SECTION 1. COMMANDS OVERVIEW
- SECTION 2. CONFIGURATION COMMANDS
- SWITCH COMMANDS
- SWA COMMAND – HOST PORT PARAMETERS
- SWB COMMAND – MESSAGE FORMAT PARAMETERS
- SWC COMMAND – MISCELLANEOUS FUNCTION PARAMETERS
- SWD COMMAND – AUXILIARY PORT PARAMETERS
- SWE COMMAND – DATA TRANSFER PARAMETERS
- SWF COMMAND – MICR OPTIONS
- SWI COMMAND – IMAGE PARAMETERS
- HW COMMAND – HARDWARE PARAMETERS
- FC – FORMAT CHANGE COMMAND
- FILE NAMES
- DOCUMENT SIZE LIMITS
- MICR LINE TECHNICAL OPTIONS
- SA – SAVE COMMAND
- SECTION 3. GENERAL OPERATIONAL COMMANDS
- SECTION 4. IMAGE SPECIFIC COMMANDS
- SECTION 5. NETWORK INTERFACE
- SECTION 6. PROPERTY COMMANDS
- PR0 – MICR IP Address Fixed Value (Ethernet Only)
- PR1 – MICR IP Address Source (Ethernet Only)
- Note
- PR2 – MICR IP Subnet Mask Fixed Value (Ethernet Only)
- PR3 – MICR Subnet Mask Source (Ethernet Only)
- PR4 – Gateway IP Address Fixed Value (Ethernet Only)
- PR5 – Gateway IP Address Source (Ethernet Only)
- PR6 – FTP Name/IP Address Fixed Value
- PR7 – FTP IP Address Source
- PR8 – FTP User ID Fixed Value
- PR9 – FTP User ID Source
- PR10 – FTP Password Fixed Value
- PR11 – FTP Password Source
- PR12 – File Name Specification
- PR13 – DNS 1 IP Address (Ethernet Only)
- PR14 – DNS 2 IP Address (Ethernet Only)
- PR15 – DNS IP Address Source (Ethernet Only)
- PR16 – Phone (Modem PPP Only)
- PR17 – User ID (Modem PPP Only)
- PR18 – User Password (Modem PPP Only)
- PR19 – FTP File Directory
- PR20 through PR29 – Predefined Snippets
- PR30 – Minimum Length
- PR31 – Minimum Height
- PR32 – Maximum Length
- PR33 – Maximum Height
- PR34 – MICR Threshold
- PR35 – MICR Amplitude Scale
- PR36 – Modem Initialization (Modem PPP Only)
- APPENDIX A. FORMAT LIST
- APPENDIX B. CHECK READING
- APPENDIX C. ASCII CODES
- APPENDIX D. EXTENDED ERROR CODES
- INDEX