Midco J121A-3 - Manual

INSTALLATION AND
SERVICE INSTRUCTIONS
INCINOMITE MODELS
J81A-3 and J121A-3
Incinerator Gas Burners
In the United States, installation must conform with local codes
or, in the absence of local codes, with National Fuel Gas Code
ANSI Z223.1-1992, or latest edition available from American
National Standard Institute. Further reference should be
made to the recommendation of your fuel supplier.
NOTE: Any additions, changes, or conversions required in order
for the gas utilization equipment to satisfactorily meet the
application needs must be made by a MIDCO distributor (or
other qualified agency) using factory specified and approved
parts.
In Canada, installation must conform with local codes or, in the
absence of local codes, with Installation Codes for Gas
Burning Appliances and Equipment, CGA
Standard
CAN/CGA 1-B-149.1 or 2. Further reference should be made
to the recommendation of your fuel supplier.
INSTALLER: Inform and demonstrate to
the user the correct operation and
maintenance of this gas utilization
equipment. Inform the user of the
hazards of storing flammable liquids and
vapors in the vicinity of this gas
utilization equipment and remove such
hazards. Affix this manual adjacent to
the incinerator burner. CODE
COMPLIANCE IS THE SOLE
RESPONSIBILITY OF THE INSTALLER.
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch;
do not use any phone in your
building.
• Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.
Installation and service must be
performed by a qualified installer, service
agency or the gas supplier.
WARNING: If the information in
these instructions is not followed
exactly, a fire or explosion may result
causing pro p e rty damage, personal
injury or death.
SAFETY INFORMATION TERMS: The following terms are used to identify hazards, safety precautions or special notations and
have standard meanings throughout this manual. When you see the safety alert symbol and one of the safety information terms, as
shown below, be aware of the hazard potential.
DANGER: Identifies the most serious hazards which will result in severe personal injury or death.
WARNING: Signifies a hazard that could result in personal injury or death.
CAUTION: Identifies unsafe practices which would result in minor personal injury or product and property damage.
PRINTED IN U.S.A.
797
8470-70
The INCINOMITE Models J81A-3 and J121A-3 incinerator gas burners feature continuously monitored electronic flame safety and
spark ignited intermittent proven ignitor (pilot). They are adaptable to either primary or secondary chamber installation.
USER: Retain this manual for future reference. If other than routine service or
maintenance as described in this manual is required, contact a qualified service agency.
DO NOT ATTEMPT REPAIRS. An inadvertent service error could result in a dangerous
condition.
MIDCO International Inc.
4140 WEST VICTORIA STREET • CHICAGO, ILLINOIS 60646 • (773) 604-8700 FAX: (773) 604-4070 • http://www.midco-intl.com