On the Edge Marketing Soccer Table #900355 - Manual (Page 5)

4
1. Find a clean, level place to begin the assembly of your soccer table. We
recommend building the table on the box top to protect the parts during assembly.
2. Place one side apron P1 UPSIDE DOWN with the finished side facing out as shown
in FIGURE 1. The ball entry hole will be closest to the floor.
3. Align the rods as shown in FIGURE 1. Please note the location of the hole that is
near one end of each rod. This is the handle end of the rod. There will be four
handles on each side of the table. It is critical that you set the rods as shown below
so the table will be correct when flipped over.
4.Once you are sure you have the rods set up correctly,slide the other side apron P1
onto the rods as shown.
P1 - Side Apron
Hole/Handle End
R2 - 3Player Rod Blue
R5 - 3Player Rod Red
R5 - 3Player Rod Red
R4 - 2Player Rod Red
R2 - 3Player Rod Blue
R1 - 2Player Rod Blue
R3 - 5Player Rod Blue
R6 - 5Player Rod Red
P1 - Side Apron
NOTE:
Dark players are red light
players a blue.