Airlink101 APO1010 - Manual (Page 97)

92
Select “Enable”, then packets with WMM QoS will take higher priority.
WMM prioritizes traffic according to four Access Categories (AC) - voice, video, best effort, and background. However, it
does not provide guaranteed throughput. Packets with QoS header including Diffserv/IP ToS and 802.1p will be mapped
into 4 Access Categories of WMM, packets without QoS header will be assigned to the Best Effort queue. Please refer to
the table below for mapping from 802.1p and ToS mapping to WMM:
Queue
Data Transmitted
Clients to AP
IP
ToS
802.1P
Priority
Priority Description
AC_BK Background.
0x08
0x20
1, 2 Low
High throughput. Bulk data that requires maximum
throughput and is not time-sensitive is sent to this queue
(FTP data, for example).
AC_BE Best Effort 0, 3 Medium
Medium throughput and delay. Most traditional IP data is
sent to this queue
AC_VI Video
0x28
0xa0
4, 5 High
Minimum delay. Time-sensitive video data is automatically
sent to this queue
AC_VO Voice
0x30
0xe0
0x88
0xb8
6, 7 High
Time-sensitive data like VoIP and streaming media are
automatically sent to this queue
Click Save button to save your changes. Click Reboot button to activate your changes. The items in this page are for AP's RF
advanced settings and will be applied to all VAPs.