Allied Telesis AT FH824U AT-FH824U - Manual (Page 30)

Technical Specifications
20
Network Criteria
1
AT-FH805u Agent
Module
1. 5 meters = 16 feet, 100 meters = 328 feet,
200 meters = 656 feet, 205 meters = 672 feet
Hub-to-Workstation
Distance 100 meters maximum using twisted-pair cable
Inter-hub Distance 10 Mbps link: 100 meters using twisted-pair cable
100 Mbps link: 5 meters using twisted-pair cable (assumes
100 meters from each node to the hub)
Total Network Span
Single Hub
200 meters of twisted-pair cable
(100 meters to each attached node)
Two-hub Chain
1
205 meters of twisted-pair cable
(100 meters to each attached node, and 5 meters between
hubs)
1. When cascading a dual-speed hub to another dual-speed hub or to a 100 Mbps hub, the cascade is
limited to two hubs, and the interhub cabling is limited to 5 meters. However, up to three 10 Mbps
hubs can be cascaded off of a dual-speed hub using 100 meters of cable for each link.
System
Configuration On-board configuration via console or modem connection to
serial port or via Telnet, Web-based management via HTTP
protocol to access embedded management program.
Management Agent SNMP support, MIB II (RFC1213), Multi-segment Repeater MIB
(RFC 2108), Ethernet-like MIB (RFC1643), RMON MIB
(RFC1757), and Allied Telesyn's private MIB.
RMON Groups 1-3, 9 (Statistics, History, Alarm, Event).
Pin
Assignment
(Station ports 1-24)
Assignment
(Daisy Chain Port)
1 Input Receive Data + Output Transmit Data +
2 Input Receive Data - Output Transmit Data -
3 Output Transmit Data + Input Receive Data +
6 Output Transmit Data - Input Receive Data -
4, 5, 7, 8 Not Used Not Used