Handling precautions, Before connections, Features – Audio2000's AKJ7002 User Manual

Page 5

Advertising
background image

Do not install the unit in following places:

In a place which is exposed to direct sunlight or near
a source of heat such as a radiator.

In a place where the heat cannot escape due to poor
ventilation, or where it is very humid or dusty.

In an unstable place with excessive vibrations or
sloping.

In a place which may be exposed to rain, such as
near a window.

In a place which may be exposed to soot, vapor or
heat, such as near a cooking stove.

Connection precautions

Be sure to switch off the powers of the related
equipment before making any connection.

The "White" input/output jacks of the amplifier are
designed for the Left channel, while the "Red' jacks
are for the Right channel. Be sure to connect the
cords without mistaking the correspondences of the
Left and Right channels.

Insert the plugs of the connection cords securely into
the jacks. If the connection is incomplete, sound may
not be produced or noise may be generated.

When unplugging the power cord from the power
outlet, be sure to grasp the plastic molding of the
plug and pull.

Power consumption of AC power outlets

Be careful that the total power consumption does not
exceed the wattage marked on the rear panel. Do not
connect other appliances than the system
components to the power outlets of this unit.

Do not connect a TV set to this unit, even if the power
consumption value marked on a TV set is below the
permissible limit of this unit. A larger current than the
permissible value may flow when the TV power is
turned on.

HANDLING PRECAUTIONS

1. 9-Step 16-Bit Digital Key Control
2. Three Microphone Inputs(Three Balanced XLR and 1/4" Combo Jacks)
3. Two Switchable RCA A/V Inputs
4. Three RCA Audio Outputs (MIC,REC,LINE)
5. Two RCA Video Inputs (VCD,DVD)
6. Two RCA Video Outputs
7. Stereo Effect Loop for External Sound Effect Units
8. Master Music Volume, Balance and Low/Mid/High Frequency Controls
9. Master Echo volume , Low/High Frequency ,Repeat and Delay Controls
10. Master Microphone Volume Control
11. Individual Microphone -20 dB Gain Pad and Signal Peak LED Indicator
12.Individual Microphone Volume,Balance,Echo and Low/Mid/High Frequency Controls
13.Stereo/Mono Echo Selection Button
14.Volume Reset Selection Switch and Remote Key Control Input
15.Remote Control
16.

AC 115V 60Hz/AC 230V 50Hz

Compatible

FEATURES

BEFORE CONNECTIONS

3

Advertising