Legacy Classic Furniture White Metal Bed Full 485-5004 888-4923C User Manual

Assembly instructions for youth metal beds, Caution, Assembly procedures

Advertising
background image

Assembly Instructions For Youth Metal Beds

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come

loose inside the carton during shipment.

Caution:

(1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more

persons in order to prevent personal injury and to insure parts are not damaged during the assembly process. If dirty, clean finished

parts with mild dishwashing liquid and water solution applied on damp cloth. Cloth should not be excessively wet. Polish finish with

soft cloth and an industry recognized furniture polish.

(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residue and

rough surfaces and also check for staples or nails left after removing the packaging material. The manufacturer will not be held

responsible if preventative steps are not taken prior to installation.

Note: The bed should not be moved after it has been assembled without first disassembling the bedrails. Excessive movement

while the bedrails are locked into place may damage bedroom parts.

Assembly Procedures:

Step 1. Insert BOLT (2) through the hole which in the middle of the METAL PLATE and attach it to the CENTER SUPPORT LEG,

tighten it with ALLEN WRENCH(8).

Step2..On each rail,insert 4 BOLTS (1) through the BED RAIL and CENTER SUPPORT LEG, and then attach FLAT WASHER

(4), SPRING WASHER (6) and NUTS (3) to the BOLTS (1), tighten them with OPENING WRENCH (9) and

SCREWDRIVER (NOT PROVIDED).

Step 3. Attach the BED RAILS ASSEMBLY to the BED ENDS using ARC WASHER (5), SPRING WASHER (7) and BOLT

(2), tighten them with ALLEN WRENCH (8).

Screwdriver

Metal Plate

Center Support Leg

Bolts 1/4"

2PCS

Metal Plate

Bed Rail

Bed Rail

2

5

7

2

Bed Rail

1

8PCS

1

Hardware List

Bolts 5/16"

8PCS

8PCS

Flat Washer

4

3

Nuts

H

ea

db

ao

rd
Post

2

Cen

ter

Su

ppo

rt

Leg

8PCS

6

Arc Washer

5

8PCS

1PCS

9

Allen Wrench (bigger)

8

8PCS

7

Parts List

Opening Wrench

1PCS

4PCS

Footboard

1PCS

Bed Rails

1PCS

Headboard

1PCS

Center Support Leg

Special Instruction: During normal everyday use bolts and nuts may loosen up. They should be periodically inspected and

re-tightened to prevent damage to the furniture or cause injury. Always check to be sure all hardware on this list is attached and kept

tightened.

Assembly is now complete

.

Advertising
This manual is related to the following products: