Ashcroft A4A - Precision Dial Pressure Gauge - Manual

I&M002-10126-5/004 Rev. 5, 1CAMR 2/07
Installation
and
Operating
Instructions
ASHCROFT ® Model A4A
Precision Pressure Gauge
Rev. 5 01/06
• Slotted Link – is recommended for applications where gauge will
be subjected to sudden release of pressure such as burst test-
ing. The slotted link option protects the movement from damage
due to rapid pressure decrease.
• Peak Load Indicator – tracks pressure change and provides indi-
cation of maximum pressure measured.
• Wall Mounting Brackets – 3 factory installed brackets allow
gauge to be mounted to any flat service without the need for a
panel cutout.
STORAGE REQUIREMENTS
Gauges should be stored in a sealed plastic bag and kept in a
clean dry area. Whenever possible the gauge should be stored in
the original carton and packing material. Storage temperatures
should be in the range of –25 to +125°F.
SHELF LIFE INFORMATION
When properly stored, no shelf life limitations will apply. However,
if the gauge is in storage in excess of one year, it is recommended
that the gauge be recertified prior to use. These gauges do not
contain rubber, plastic or any other soft materials subject to drying
and/or cracking. There are no O-rings or elastomer seals.
SPECIAL HANDLING REQUIREMENTS
This is a high precision gauge. As with any precision test equipment
it should be handled with care to assure its accuracy is maintained.
FOR A COMPLETE OPERATION AND MAINTENANCE USER’S
MANUAL CONTACT THE FACTORY CUSTOMER SERVICE
DEPARTMENT.
Ashcroft Inc.
250 East Main Street
Stratford, CT 06614
Tel.: 203-378-8281
Fax: 203-385-0402
email: [email protected]
www.ashcroft.com
© 2006 Ashcroft Inc. All rights reserved.
All sales subject to standard terms and conditions of sale.
250 East Main Street, Stratford, CT 06614
Tel: 203-378-8281, Fax: 203-385-0402, www.ashcroft.com
I&M002-10126-5/004 Rev. 5, 1CAMR 2/07