Ashcroft DM61 - Manual (Page 11)

Serial Communication Adapters Instruction Manual
11
Connections
A Cat5e cable is provided to connect the DM61 meter to the 101B224-06
serial adapter.
DM61 Serial Communication Address (serial)
The DM61 meter is factory set to address 001.
To change the DM61 meter address:
1. Press and hold the Menu button for three seconds to access Ad-
vanced Features menu of the meter.
2. Press Up arrow until Serial (SEriaL) menu is displayed and press
Enter, Addres is displayed.
3. Press Enter to change meter address using Right and Up arrow
buttons. Press Enter to accept.
4. Press Menu button to exit and return to Run Mode.