Horner APG XLt OCS HE-XT102-10 - Manual (Page 2)

PAGE 2 21 AUGUST 2007 MAN0864-02
HE-XT102-10 Specifications / Installation
3
Panel Cut-Out and Dimensions
Note: Max. panel thickness: 5 mm.
Refer to XLT User Manual (MAN0863) for panel box information and
a handy checklist of requirements.
Note:
The tolerance to meet NEMA standards is ± 0.005” (0.1 mm).
4
Ports / Connectors / Cables
Note:
The case of the XLT is black, but for clarity, it is shown in a
lighter gray color.
3.
62
2 [9
2m
m
]
3.622 [92mm]
001XLE002
Power Connector
Power Up:
Connect to Earth Ground.
Apply 10 - 30 VDC.
Screen lights up.
CAN Connector
Use the CAN Connector when
using CsCAN network.
To Remove Back Cover:
Unscrew 4 screws located
on the back of the unit.
Lift lid.
CAUTION: Do not
overtighten screws when
screwing the lid back on.
I/O Jumpers: (Not Shown):
I/O Jumpers (JP) are located
internally. To access, remove
back cover of unit.
Wiring Connectors (J1 / J2):
I/O Jumpers (JP1 / JP2),
and DIP Switches (RS-485)
are described in the DIP
Switches,
Wiring and
Jumpers section of this
document.
Memory Slot:
Uses Removable Memory
for data logging, screen
captures, program loading
and recipes.
Horner Part No.: HE-MC1
Serial Communications:
MJ1
: (RS-232 / RS-485) Use
for Cscape programming and
Application-Defined
Communications.
MJ2:
(RS-232 / RS-485) Use
for Application-Defined
Communications
MJ1
(RS-232 / RS-485)
MJ2
(RS-232 / RS-485)
J1
I/O
Jumper
Memory Slot
001XLE029-R2
J2
I/O
Jumper
NET 1
(CsCAN)
Power
DIP
Switch