Horner APG SmartStack I/O HE-DIM410 - Manual

MAN0369-05 10 NOV 2006 PAGE 1
DIM310/410
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
DIM
310
DIM
410
DIM
310
DIM
410
Inputs per Module 16 32 Minimum ON Current 1 mA.
Commons per Module 3 6 Input Characteristics Bi-Directional
Input Voltage Range 12–24 VDC Maximum OFF Current 200
µA
Peak Voltage 35 VDC Max. OFF to ON Response 1 ms.
Isolation Voltage
(Common to Common
and Common to
Channel)
500 VDC ON to OFF Response 1 ms.
Required Power
(Steady State) 24 W
(10 mA@24 VDC)
Terminal Type Spring Clamp, Removable
Required Power
(Inrush) Same as Steady
State
Relative Humidity 5–95% Non-condensing
ON Voltage Level 9 VDC Min.
OFF Voltage Level 3 VDC Max.
Input Impedance 10 K Ohms
Operating Temperature 0
°–60° Celsius
CE
UL
See Compliance Table at http://www.heapg.com/Support/compliance.htm
12 / 24VDC Input Module
HE800DIM310 / HE800DIM410
HE-DIM310* / HE-DIM410*
16 / 32 Channels
Positive or Negative Logic
* HE- denotes plastic case.