Horner APG SmartStack I/O HE-HSC600 - Manual

MAN0265-09 10 NOV 2006 PAGE 1
HSC600
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
This product also has a detailed supplement (SUP0265) available.
1 SPECIFICATIONS
INPUT HSC600 HSC600
Inputs per
Module
8 Commons per Module 1
Zero
Crossing
TTL /
5 VDC
12
VDC
24
VDC
Input Type Positive Logic
Peak Voltage 35 VDC Max.
+ 0.1 + 2 + 8 + 16
Input Impedance 10 KΩ
Programmable
Input Voltage
Ranges
ON Voltage
Level
OFF Voltage
Level
- 0.1 + 0.8 + 4 + 8 Input Filter
500 KHz, 50 KHz,
5 KHz
OUTPUT HSC600 HSC600
Outputs per Module 8 Output Protection Short Circuit
Commons per Module 1 Maximum Leakage Current 100 µA
Operating Voltage 5–35 VDC Maximum Inrush Current 600 mA. per channel
Output Type
Sinking / 10 K Pull-Up
Negative Logic
Minimum Load None
Peak Voltage 35 VDC Max. OFF to ON Response 0.3 µS.
Output Characteristics Current Sinking ON to OFF Response 2 µS.
ON Voltage Level
1.5 VDC Max. @ 500 mA
0.7 VDC Max. @ 250 mA Maximum Load Current per
Output
0.5 A
General Specifications
Required Power
(Steady State) 0.29 W (12.43 mA @
24 VDC)
Relative Humidity 5–95% Non-condensing
Operating
Temperature 0 °–60° Celsius
Required Power (Inrush)
0.44 W (18.4 mA @
24 VDC)
Weight 9.5 oz. (270 g)
CE See Compliance Table at http://www.heapg.com/Support/compliance.htm
UL
Operating Temperature Code T4A;
See Compliance Table at
http://www.heapg.com/Support/compliance.htm
High Speed Counter
HE800HSC600 / HE-HSC600*
High Speed Counter Inputs
Sinking Pulse Outputs
* HE- denotes plastic case.