Matrix Orbital GLT240128 Legacy - Manual (Page 11)

6. Follow the instructions on the screen to complete the installation
7. MOGD# requires the .NET framework 2.0 and will download and install it automatically
After the installation is complete there will be a Matrix Orbital entry under "Start->Programs->Matrix Or-
bital" in the start menu. Click on the ’Mogd Sharp’ entry to run the program.
Be sure to check the information selected in the configuration panel the first time MOGD# is run. Once
this information is entered correctly the program can be used to control all functions of the graphic display.
Port The serial port the display is plugged in to.
Speed The communication speed the display module is set to.
(Default 19,200)
Display Type The type of display (GLT240128)
PCB Revision The revision of the display you are using.
(Found on the back of the PCB).
Figure 9: Mogd Sharp Settings
• Winzip is available as a free download from http://www.winzip.com
2 Hardware Information
Refer to the following diagram for this chapter:
Matrix Orbital GLT240128 6