Siemens KF18RA60 - Manual (Page 19)

19
Usable capacity
Information on the usable capacity can be
found inside your appliance on the rating
plate.
Interior fittings
of refrigerator
compartment
You can vary the shelves inside the
refrigerator compartment and the door
shelves as and when required: Pull the
shelf forwards, lower and swing out to
the side, Fig. 5. Raise the door shelf and
remove, Fig. 6.
Special features
(not all models)
Vegetable container with temperature
and humidity regulator
Fig. 7
For longĆterm storage of vegetables,
lettuce and fruit slide the regulator all the
way to the right. Ventilation aperture is
open Ć low air humidity - Temperature
drops.
For shortĆterm storage slide the regulator
to the left. Ventilation aperture is closed Ć
high humidity - Temperature rises.
Vario" shelf
Fig. 8
Remove the front half of the split glass
panel and insert into the groove situated
below. Tall produce can then be placed
on the shelf underneath (e.g. jugs,
bottles).
Drawer for cold meats and cheese
Fig. 9
To remove the drawer, lift and pull out.
The holder can be moved.
Bottle shelf
Fig. 0
Bottles can be stored securely on the
bottle shelf.
Bottle holder
Fig. q
The bottle holder prevents bottles from
falling over when the door is opened and
closed.
Temperature indicator
(Not all models)
The temperature indicator indicates
temperatures below +4
°
C and is used
to determine the required setting of the
temperature controller. Depending on
the room temperature, set temperature
controller between 2 and 3. If a degreeĆ
precision setting is possible, set appliance
to +4 °C or colder.
After approx. 12 hours, when the
temperature has dropped below +4
°
C
OK" is indicated (if this does not occur,
gradually set the temperature colder).
Correct setting Temperature
too high, set
temperature
colder.
en