Preparing milk froth and warm milk – Siemens TE809501DE User Manual

Page 48

Advertising
background image

44

en

Drink preparation with milk

The appliance must be ready for use.

● Place the suction pipe

10d of the milk

frother

10 deep in the milk container 26.

● Swivel the coffee outlet

9 to the right until

it clicks into place.

● Place the pre-warmed cup or glass under

the coffee outlet

9 and milk frother 10.

● Select the required

Caffe Latte,

Macchiato, Cappuccino or My coffee by

turning the rotary knob

6.

● Open the powder compartment

18.

● Pour in no more than 2 level measuring

spoons

14 of ground coffee.

¡

Warning!

Do not use whole beans or instant coffee.

● Close the powder compartment

18.

● Press the

start button 8.

First milk is delivered into the cup or glass.

Then the coffee is brewed and dispensed

into the cup or glass.

Important: Dried milk residue is difficult

to remove, so the milk frother

10 must be

cleaned with lukewarm water immediately

after use (see “Cleaning the milk system”).

Note: Repeat the procedure for another

cup of coffee / milk drink. If coffee is not

dispensed within 90 seconds, the brewing

chamber empties automatically to avoid an

overflow. The appliance rinses.

Preparing milk froth and

warm milk

¡

Risk of burns!

The milk frother

10 gets very hot. After use,

allow to cool down first before touching.

The appliance must be ready for use.

● Place the suction pipe

10d of the milk

frother

10 deep in the milk container 26.

● Place the pre-warmed cup or glass under

the outlet of the milk frother

10.

● Select the required setting

Milk froth or

Warm milk by turning the rotary knob 6.

● Press the

start button 8.

Milk froth or warm milk flows from the outlet

of the milk frother

10.

Press the

start button 8 again to cut the

process short.

Info: When preparing warm milk, you may

hear a whistling sound. This is caused by

the milk frother for technical reasons.

Tip: For optimal milk froth quality, use cold

milk with a fat content of at least 1.5 % if

possible.

Important: Dried milk residue is difficult

to remove, so the milk frother

must be

cleaned with lukewarm water immediately

after use (see “Cleaning the milk system”).

Advertising
This manual is related to the following products: