Siemens DO05755K - Manual (Page 18)

18
en
Water connection
Caution! ■
The existing fitting may not be covered with scaling.
Do not grease the thread! ■
Info: Replacement for damaged threaded nozzles available
from customer service.
Undersink appliances DO05705, DO05755,
DO05755K, DO3170D5, DO3175D5 and
DO05705CH
Fit the taps if required ( ■ A1 and A2).
Insert the seals ( ■ B1).
Ensure the axial fit of the connection pipes in the nozzles. ■
Place the union nuts on the thread and tighten them by ■
hand (B2).
Tighten the screw fitting ( ■ C). Counter the threaded noz-
zles on the warm water heater with a wrench
After the unit has been used to heat water a few times, ■
retighten the screw fitting.
B2
C
A1
A2
B1