Getting started, 1 performing the initial start up – ANUBIS R00 User Manual
Page 7
Advertising
1
1
Getting Started
This chapter tells you step by step how to perform the initial startup and introduces
the components of your device.
1.1 Performing the Initial Start Up
1. Slide the ON/OFF switch to the ON (right) position.
CAUTION:
Always leave the ON/OFF switch in the ON position for normal operation.
2. Your device turns on and displays the
“Change Language” screen. Tap the
desired language.
NOTE:
You can change the language later on by tapping Setting Change Language.
(See section 3.6 for details.)
Advertising