Change the month, Change the date, Set password – Acroprint ES700 User Manual
Page 33
ES700 User’s Manual
27
Change the Month
1. In this example, press CHANGE until the month is "11" (November). Refer to
.
2. Press SET.
3. The flashing changes from "Month" to "Date".
Change the Date
1. In this example, press CHANGE until the date is "02". Refer to
2. Press SET.
3. The "Ending Date" of the display changes from flashing to steady and the S
mark is
displayed under "SU".
Set Password
Once the password is set, you must enter it before changing any settings. Refer to
.
Example: Set the Password to "1234".
1. Press SELECT until the T is above the "PASSWORD" mark.
You may choose any 4-digit number from 0001 to 9998.
Numbers "0000" and "9999" are not valid passwords.
All settings must be reset if you forget the password. Refer to
SELECT
CHANGE SET
DST
END
SU
SELECT
CHANGE SET
DST
END