Allied Telesis 86241-06 - Manual (Page 7)

Patch 86241-06 For Rapier Switches 7
Patch 86241-05 for Software Release 2.4.1
C613-10340-00 REV E
Debugging commands are now available for the RADIUS and TACACS
control protocols. Raw packets, decoded packets, and errors can now be
displayed.
Access control packet debugging allows the contents of the packets to be
viewed. The debugging commands allow both raw (hexadecimal dumps)
and/or decoded (human-readable) packet displays. Information on any
errors occurring in the transactions can be displayed once the appropriate
debugging command is issued.
Only users with SECURITY OFFICER privileges in system secure mode are able to
enable RADIUS and TACACS debugging.
The debugging commands are:
ENABLE RADIUS DEBUG={ALL|PKT|DECODE|ERROR} [,...]
ENABLE TACACS DEBUG={ALL|PKT|DECODE|ERROR} [,...]
DISABLE RADIUS DEBUG={ALL|PKT|DECODE|ERROR} [,...]
DISABLE TACACS DEBUG={ALL|PKT|DECODE|ERROR} [,...]
SHOW RADIUS DEBUG
SHOW TACACS DEBUG
The SET INSTALL command was generating an unwanted warning
message on Rapier i series switches. This issue has been resolved.
Features in 86241-04
Patch file details are listed in Table 3:
Patch 86241-04 includes all issues resolved and enhancements released in
previous patches for Software Release 2.4.1, and the following enhancements:
Virtual interfaces were displayed incorrectly when VLANs were
multihomed. This issue has been resolved.
If the command ADD FIREWALL POLICY RULE SOURCEPORT=ALL was
executed, a value of “65535” was incorrectly displayed for the
SOURCEPORT parameter for that rule in the SHOW FIREWALL POLICY
command. This issue has been resolved.
PCR: 03002 Module: USER Network affecting: No
PCR: 03013 Module: INSTALL Network affecting: No
Table 3: Patch file details for Patch 86241-04.
Base Software Release File 86s-241.rez
Patch Release Date 15-Jan-2003
Compressed Patch File Name 86241-04.paz
Compressed Patch File Size 208232 bytes
PCR 02244 Module: UTILITY Network affecting: No
PCR: 02300 Module: Firewall Network affecting: No