Noises, Ventilation requirements – AEG AGN71800F0 User Manual
Page 16
3.
Connect the wire coloured brown to the terminal either marked with the “L“ or col-
oured red.
4.
Check that no cut, or stray strands of wire is present and the cord clamp
4
is secure
over the outer sheath.
5.
Make sure the electricity supply voltage is the same as that indicated on the appliance
rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted
2
. In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it
is disposed of safely.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
BRRR!
HISSS!
CLICK!
BLUBB!
CRACK!
SSSRRR!
OK
50 mm min.
200 cm
2
min.
200 cm
2
16
Noises