Samlex America S-R8 - Manual (Page 3)

www.samlexamerica.com
• Connect the wire RJ-11 to the remote port in front of the panel.
 Ignition Lockout function – The Ignition lockout function is to turn the Inverter OFF when the auxiliary input
wiring is connected to the ACC, and “+” battery voltage signal is applied.
 Reverse Override Function – The Reverse Override Function is to turn the Inverter ON when the auxiliary
input wiring is connected to the reverse gear shift, and “+” battery voltage signal is applied.
• Installation Procedure
1. Refer to the drawing (see Figure 2) for hole and cutout dimensions.
2. Use the cable between CR8 remote and the inverter.
3. Switch the inverter to REMO position.
Figure 2