Kinivo BTH410 Bluetooth Stereo Headphone - Manual (Page 6)

Kinivo BTH410 Stereo Bluetooth Headphone 6
3. Bluetooth Pairing
a. Ensure the headphones are powered off, then enter the pairing mode on the
headphones by pressing and holding the multifunction button for 7 to 10 seconds
until the blue and red lights start flashing alternatively (Note - do not release when
you see only the blue light)
b. Follow the operating instruction of your Bluetooth device to start the pairing process.
For iPad, iPhone, iPod Touch
Navigate to Settings > General > Bluetooth (On), then select the BTH410 to pair the head-
phones.
For Android smartphones
Navigate to Settings > Wireless & networks > Bluetooth settings while Bluetooth is en-
abled, then select Scan for devices. Select the BTH410 to pair the headphones.
4. To Pair with Windows 7 or Windows 8
a. Make sure your computer is Bluetooth enabled and supports Bluetooth stereo
(A2DP).
b. After putting the BTH410 headphones in pairing mode, right click the Bluetooth tray
icon then select ‘Add a Device’ from the context menu. Under Windows 8, type “Add a
Bluetooth device”
c. Locate the BTH410 from the devices list and click the Next button.
d. After your computer has loaded the device and the drivers for the headphones, you
should see that the device has successfully connected. Continue by clicking Close on
the Add a device window and closing the second information window.
e. Right click the Volume control tray icon then select ‘Playback devices’ from the
context menu.