Kinivo BTM440 Bluetooth Headset - Manual (Page 7)

Kinivo BTM440 Bluetooth Headset 7
will automatically enter standby mode. In this state, the BTM440 will preserve
battery power. To wake the device, simple press any button on the BTM440.
4. Bluetooth Pairing
a. Ensure the headset is powered off, then enter the pairing mode on the
headset by pressing and holding the multifunction button for 6-8 seconds
until the blue and red lights start flashing alternatively (do not release
when you see only the blue light).
b. Follow the operating instruction of your Bluetooth device to start the
pairing process.
For iPad, iPhone, iPod Touch
Navigate to Settings > General > Bluetooth (On), then select the BTM440 to pair
the headset.
For Android smartphones
Navigate to Settings > Wireless & networks > Bluetooth settings while Bluetooth
is enabled, then select Scan for devices. Select the BTM440 to pair the headset.
5. To Pair with Windows 7
1. After putting the BTM440 headset in pairing mode, right click the Bluetooth
tray icon then select ‘Add a Device’ from the context menu.
2. Locate the BTM440 from the devices list and click the Next button.