Kinivo BTX350 Wireless Bluetooth Speaker - Manual (Page 9)

9 Kinivo BTX-350 Digital Wireless Speaker
For Android smartphones and tablets
Navigate to Settings > Wireless & networks > Bluetooth settings while Bluetooth is enabled, then select Scan for devices. Select
the Digital SPKR to pair the speaker.
For all other devices
Please follow your devices’ instructions on how to perform Bluetooth pairing.
Process to pair a currently paired speaker to new device
If the speaker is already paired to a device then it will get connected to that device when powered on. In this case, you have to use
a slightly different process to put the speaker in pairing mode.
Ensure that the speaker is powered off. Press and hold the Pair and Power button together for 6 to 8 seconds.
4. Auxiliary Input
Use a 3.5mm audio cable to connect the speaker to another audio source. Press the Source button to toggle between
the Bluetooth audio source and auxiliary input source.
5. Charging BTX350 speaker
To charge the BTX350 speaker, connect the micro USB cable to the BTX350 and plug the speaker into a USB power source. USB
power sources include computers, laptops, USB hubs, USB AC adapters, and USB car chargers.