Kinivo BTX450 Wireless Bluetooth Speaker EN - Manual (Page 5)

5 BTX450 Kinivo Wireless Bluetooth Speaker
Supporting Bluetooth protocol v2.1+EDR and A2DP 1.2 audio streaming
profile
Connect an iPod or MP3 player via 3.5mm port
Charge your device while listening to music via USB port
Operation
1. Turn Unit On/Off
Press and hold the power button for 3 to 5 seconds to turn the speaker on. Press
and hold the power button to turn the speaker off.
NOTE: The Bluetooth takes 2-3 seconds to switch on after the speaker is
powered on.
2. Adjust Volume
Press the volume button to increase or decrease volume. Press and hold the
volume button to continuously increase or decrease the volume.
3. Bluetooth Pairing
a. The speaker needs to be paired to a Bluetooth device before using. Press
and hold the Bluetooth button on the speaker for 2 to 3 seconds, the speaker
will play an audible tone and the Bluetooth LED will blink quickly. Activate the
Bluetooth function on your device that you wish to connect to and search for
and pair to the BTX450.