Kinivo BTC450 Bluetooth Hands-Free Car Kit for Cars with Aux Input Jack EN - Manual (Page 6)

Kinivo BTC450 Bluetooth Car Kit
6
Operation
1. Turning Unit On
The BTC450 car kit will automatically power on when the car is switched on.
2. Adjust Volume
Use car stereo controls to adjust volume levels.
3. Bluetooth Pairing
a. The BTC450 Car kit will automatically enter pairing mode when powered on.
If the device is not entering pairing mode, press and hold the multifunction
button for 3 to 4 seconds. Activate the Bluetooth function on your device that
you wish to connect to and search for and pair to the BTC450.
For iPad, iPhone, iPod Touch
Navigate to Settings > General > Bluetooth (On), then select the BTC450 to pair
the car kit.
For Android smartphones and tablets
Navigate to Settings > Wireless & networks > Bluetooth settings while Bluetooth
is enabled, then select Scan for devices. Select the BTC450 to pair the car kit.
Function Operation
Bluetooth pairing mode
Press and hold multifunction button for 3 to 4
seconds
Reconnect Bluetooth (in
standby mode)
Press multifunction button
Voice command
Voice dialing
(Siri for supported
iPhones)
To use this feature your mobile device must
support the voice dialing function.
1. Press and hold multifunction button for 1 to
2 seconds. You will hear a beep prompt.
2. Give voice command.